Squid Ink Ferrous Xtract is our potent, PH neutral bleeding iron fallout remover. Iron particles can easily become embedded in paintwork or on wheels. The most common cause of iron contamination is from brake pad dust particles that build up over time. This then oxidises and becomes lodged, leaving paint or wheels feeling rough to the touch.
Ferrous Xtract safely reacts with this contamination, turning a bright purple colour. This can then be rinsed off with water, safely removing the contamination.
- Wash paintwork or wheels before application.
- Spray Ferrous Xtract onto the surface.
- Embedded Iron Oxide particles will react turning purple.
- Wheels can be agitated with a brush if required.
- Rinse well with a pressure washer or hosepipe.
Do not allow the product to dry on any surface, it should not be used in direct sunlight and care must be taken in warm weather. Do not leave to bake on or dry out. Spritz with water to keep damp if required. Test on a small inconspicuous area before extensive use.
Keep out of reach of children. Cap is a choking hazard to small children. Always wear suitable PPE when handling chemicals. Full SDS available on website or on request.
H302 Harmful if swallowed
H317 May cause allergic skin reaction
P261 Avoid breathing vapour/spray
P264 Wash contaminated skin thoroughly after handling
P270 Do not eat, drink or smoke when using product
P301+310 If swallowed immediately seek medical advice
P302+352 Wash with water if contacts skin