Squid Ink Fortress SiO2 Sealant

Squid Ink Fortress is our new long lasting, high gloss SiO2 infused sealant.

The product is basically the love child between our Tanzanite and Afterglow waxes, but in a liquid sealant form.

Fortress contains the same synthetic crosslinked polymers found in Squid Ink Tanzanite, and the same additive that gives our Afterglow wax it's extreme glossiness. We've carefully designed, tested and manufactured Fortress in house, so you won't find this blend elsewhere.

The result is an extremely hydrophobic, long lasting and mega glossy sealant that can be applied quickly and easily. A coat of Fortress will protect and fortify modern vehicle paintwork from water, dirt and road grime for several months. 

DIRECTIONS:

Shake well before use and wear gloves/PPE when using this product:

1. Pre-wash and clean vehicle.
2. Decontaminate paintwork with Ferrous Xtract, Clay and Tar & Glue (optional)
3. Polish and panel wipe to remove marring and oils (optional)
4. Spray a small amount of product onto applicator.
5. Apply to a small area in cross hatch motions.
6. Leave product to flash/cure.
7. Gently buff with a tight weave microfibre to remove.
8. Buff with an Octoplushy microfibre to finish. 

If possible, try to avoid getting vehicle wet for at least a few hours after application. This will improve sealant adhesion as the bond develops after application.

Decontaminating and polishing is optional but recommended. Waxes and sealants will always adhere better and last longer on well prepared paint.

Do not use in direct sunlight or in hot conditions and do not over-apply. Flash time will depend on ambient air temps and humidity. Cure time will take longer during cooler weather. Ensure product has fully cured before removal.

WARNINGS:

Keep out of reach of children. Flammable liquid, may be fatal if swallowed. Always wear suitable PPE and take care when handling chemicals. Full safety data sheets are available on our website.

Shipping Options